Not long ago I read a rant by someone who was (rightly) complaining about the poor quality of the ingredients you find in store-bought beer. I thought I would post how I brew my beer so that people could see how simple it really is. It’s also cheaper!
The beer I brew, which is about as complicated as baking bread or a batch of cookies, easily rivals the more expensive beers you can buy in the store. So here we go!
Start with fresh water
I got my recipe from the people at the store where I buy my ingredients. I start with fresh water. I add 4 cups of rolled barley (I buy organic barley in bulk) to a sock that acts like a tea bag. Then I steep the barley in water that is almost boiling for 30 minutes. Once I have this started, I get out the yeast so that I can bring it to room temperature and I clean and disinfect the primary fermenter.
Barley “tea”
Brewing beer is similar to making cheese. You must make sure your utensils are extremely clean so that you don’t introduce unwanted yeast or bacteria to your product. Just so you know, the worst that can happen is that you spend money brewing a batch of bad beer. To my knowledge, no one has suffered from food poisoning from a bad batch of beer. You do suffer a financial loss, though, something I think we all want to avoid.
Ingredients for beer
In addition to water, these are the only ingredients you need to successfully brew a good batch of beer: yeast, grains (in this case, barley), a malt extract, corn sugar that you will use later, right before you bottle your beer, and hops.
Cleaning & disinfecting the primary fermenter
After you have cleaned and disinfected your primary fermenter and steeped the barley, the next step is to add the malt extract and hops to the barley “tea” and boil your wort. Depending on the recipe, different types of hops are added at different points during the period where your wort is boiling.
When this is finished, you need to cool your wort to room temperature by putting it in an ice water bath so that you can add the yeast without killing it. Just so you know, I have added yeast to wort that was as warm as 95° Fahrenheit and the beer did not suffer. I was just too impatient to wait for it to come down to the prescribed 70° Fahrenheit.
Primary fermentation has begun
After the wort is cooled, I add more cold water so that the batch comes up to 5 gallons. I then add the yeast, give it a good stir and put the fermentation lock on top of the lid of the primary fermenter. This allows gas to escape without letting wild yeast into your brew. Now I just sit back and wait for it to ferment a little while. In about week, I will move the beer into the secondary fermenter. It will ferment for about a week longer before I bottle it. I’ll post another article on the racking and bottling process.
For those of you who are interested in getting started brewing your own beer, you can purchase everything you need for around $150. Each successive batch costs me between $30 and $50 for a five gallon batch, roughly equal to the amount of beer in two cases.
Brewing beer can be much more complicated than the process I have outlined here. A real food purist might want to grow his own hops. He might want to make his own malt extract instead of having it done for him, sort of like baking a cake from scratch instead of using a mix. He might want to experiment with different grains, different yeasts, different brewing processes. But if you are incurably lazy like I am, you can brew really tasty beer with very little effort.
And for my Catholic friends who prefer to drink blessed beer, here is a link to a blessing for beer. 😀
The City Girl Farmer 